- 22 joints, all motor-driven Five in the thumb, four each in the index, middle and ring fingers, and five in the little finger, which gains a roll axis.
- Human-hand scale at 620 g An aluminium-alloy hand measuring 102 × 187 × 26 mm that holds 1 kg continuously and 2 kg at peak.
- Impact protection on every joint A protection structure shields the precision micro gearboxes when a joint takes an extreme external blow.
- Backdrivable, with dual encoders Every joint can be back-driven and reports its position through two encoders.
- Gigabit Ethernet, USB or RS-485 Two T1s Ethernet ports and USB run the control loop at 1,000 Hz and high-speed RS-485 at 50 Hz, and in the Ethernet configuration a palm camera plugs straight into the hand.
- 15–65 V through XT30 The hand takes a wide supply range through an XT30 connector and draws up to 200 W at peak.
Description
The Unitree Dex5-S is Unitree's 22-degree-of-freedom dexterous robotic hand, built at 1:1 human-hand scale with every joint driven by its own motor. The thumb has five degrees of freedom, the index, middle and ring fingers four each, and the little finger five, including a roll axis; all 22 joints are backdrivable, carry dual encoders and run on precision micro gearboxes.
That full actuation separates it from Unitree's Dex5-1, which has 20 degrees of freedom with 16 active, weighs 1,100 g and connects over USB. The Dex5-S puts more motion into a smaller hand: 620 g in an aluminium-alloy housing measuring 102 × 187 × 26 mm, holding 1 kg continuously and 2 kg at peak. It suits research teams and humanoid builders working on teleoperation, in-hand manipulation and learning from human demonstration, where a hand the size of the operator's keeps motion mapping direct.
Every joint has an impact-protection structure that shields its gears when the joint takes an extreme external blow. The hand runs on 15–65 V through an XT30 connector with a 200 W peak and connects by Gigabit Ethernet (two T1s ports, 1000BASE-T1), USB or high-speed RS-485 at 6 Mbps; Ethernet and USB close the control loop at 1,000 Hz and RS-485 at 50 Hz. In the Ethernet configuration a palm camera plugs straight into the hand. Each joint takes mode, position, velocity, torque, stiffness and damping commands and reports mode, position, velocity, torque, temperature, voltage and current.
This is the Dex5-S without tactile sensing; the Dex5-S Pro adds it to the same hand. Hand side and mounting to your arm or humanoid are confirmed with the quotation. Compare it with the rest of our dexterous robotic hands.
Key Capabilities
- 22 joints, all motor-driven: Five in the thumb, four each in the index, middle and ring fingers, and five in the little finger, which gains a roll axis.
- Human-hand scale at 620 g: An aluminium-alloy hand measuring 102 × 187 × 26 mm that holds 1 kg continuously and 2 kg at peak.
- Impact protection on every joint: A protection structure shields the precision micro gearboxes when a joint takes an extreme external blow.
- Backdrivable, with dual encoders: Every joint can be back-driven and reports its position through two encoders.
- Gigabit Ethernet, USB or RS-485: Two T1s Ethernet ports and USB run the control loop at 1,000 Hz and high-speed RS-485 at 50 Hz, and in the Ethernet configuration a palm camera plugs straight into the hand.
- 15–65 V through XT30: The hand takes a wide supply range through an XT30 connector and draws up to 200 W at peak.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex5-S |
| Scale | 1:1 human hand |
| Degrees of freedom | 22 |
| Thumb | 5 DoF |
| Index, middle and ring finger | 4 DoF each |
| Little finger | 5 DoF, including a roll axis |
| Actuation | All 22 joints motor-driven and backdrivable |
| Encoders | Dual encoder on every joint |
| Gearing | Precision micro gearboxes |
| Impact protection | All 22 DoF |
| Payload (continuous) | 1 kg per hand |
| Peak payload | 2 kg |
| Dimensions (L × W × H) | 102 × 187 × 26 mm |
| Weight | 620 g |
| Housing | Aluminium alloy |
| Tactile sensing | None (fitted on the Dex5-S Pro) |
| Supply voltage | 15–65 V |
| Power connector | XT30 |
| Peak power | 200 W |
| Communication | T1s Ethernet × 2, high-speed RS-485 × 1, USB × 1 |
| Gigabit Ethernet | Yes (1000BASE-T1 configuration) |
| Baud rate | 6 Mbps |
| Control loop rate | 1,000 Hz (T1s Ethernet / USB); 50 Hz (high-speed RS-485) |
| Sensing and feedback | Joint mode, position, velocity, torque, temperature, voltage and current |
| Control commands | Joint mode, position, velocity, torque, stiffness, damping |
| Palm camera | Connects directly to the hand in the Gigabit Ethernet configuration |
| Hand side | Left or right, confirmed with the order |
| Robot mounting and compatibility | Confirm at quote |
Industries
Frequently Asked Questions
The Unitree Dex5-S 22-DoF Dexterous Hand is priced at AED 24,200 in your market.
22: five in the thumb, four each in the index, middle and ring fingers, and five in the little finger, including a roll axis. All 22 joints are motor-driven and backdrivable.
No. The Dex5-S Pro adds tactile sensing to the same 22-DoF hand; dimensions, weight and electrical specification are shared.
1 kg continuously and 2 kg at peak, per hand. Every one of the 22 joints has impact protection for its gearbox.
By Gigabit Ethernet (two T1s ports, 1000BASE-T1), USB or high-speed RS-485 at 6 Mbps, from a 15–65 V supply. Ethernet and USB run a 1,000 Hz control loop and RS-485 runs at 50 Hz; hand side and mounting to your arm or humanoid are confirmed with the quotation.
The Dex5-1 has 20 degrees of freedom, 16 of them active, weighs 1,100 g and connects over USB 2.0. The Dex5-S drives all 22 joints, adds a roll axis to the little finger and is built at human-hand scale at 620 g.
Recently Viewed
You haven't viewed any products yet.
